Hooks, Thimbles & Pulleys

The Monkey Fist Solid Recovery Ring brings a new dimension to the Carbon Offroad stable of lightweight and strong recovery items.   This solid billet 6061 T6 Aluminium Recovery Ring which is designed to be used with the Monkey Fist soft shackle will allow you to setup a double line pull with your synthetic rope electric winch.   With lasered branding not embossed, CNCed or stamped branding affecting the operation of the ring against the soft shackle, and a low friction co-efficient anodised finish, this solid recovery ring will provide years of trouble-free double line pulls. 

Sick of reaching all the way underneath your rig to unlatch the winch hook from those recovery points located way underneath your bullbar? I know we got pretty sick of it! The winch utility hook is primarily designed to bolt into the fairlead bolt hole and provide a point for the winch hook to attach to which is easy to access and most of all, looks amazing on the front of your rig. For winches where the mounting bolt for the winch uses the same hole as the fairlead mount, you could simply mount this hook off to one side or wherever will work for your setup. Depending on the thickness of the material you are going through you could space out or simply grind the bottom part of the hook mount recess to suit allowing for a tight cinch up on the mounting point The beauty of this little hook is that it can also be used for an endless number of other uses around your rig as a standard hook for hanging items in a canopy or organising items on the back of a cargo barrier. This will suit most narrow standard style hooks on the market, not the wider style that sits flat agaisnt the fairlead.     The hook is made from high quality 6061 T6 alloy and is anodised in Carbon Maroon or Carbon Black. It comes with a stainless cap head bolt, flat and spring washer with standard nut. 

Carbon 4.75 Ton Bow Shackle Want a tough bow shackle ? Get the new Carbon 4.75 Ton Bow Shackle with anti-rattle insulators,  if you leave the shackles on your recovery points, it stops them from chipping the paint off your expensive bullbar and driving you insane with that annoying rattle.  Rated to 4.75 Tonne  Made from Strong C45 steel Zinc plated then powder coated black for ultimate longevity.   19mm body  22mm pin  Powder coated black steel  2 x plastic washers  1 x plastic insulator 

This hook strap is designed to provide a safe method of carrying the hook without risk of getting fingers jammed in between the gate or other attached accessories.  290mm long

The Carbon Offroad Monkey Fist winch rope thimble is a great bit of kit. Stop cutting your hands up on old winch hooks with nasty spring gates, this winch thimble offers a user friendly experience when it comes to setting up a winch recovery.  Rating 10,000KG H/D 22mm Stainless Steel Pin The thimble is simply pulled into the fairlead for storage, it is perfectly sized to grab hold of with one hand, leaving the other hand free to help scramble up a hill, or connect up a shackle.  With a 6061 T6 Alloy CNC machined section of billet alloy, this is one sexy bit of gear. Make a statement, get rid of your old hook and get this functional piece of winching gear on your rig. It is Type 3 hard anodised to Milspec requirements allowing your investment in good gear to last through the course of time in our harsh Australian conditions.  The attachment point is compatible with synthetic rope soft shackles and also 4.25T steel bow shackles. The nice radius edges on the mounting eye will not damage your soft shackle. The circlip secured winch rope pin mount means you don't have to stuff around with splicing this onto your winch rope, simply remove the hook and replace with our winch thimble. 

A more compact version of our original snatch block.  Solid, reliable and simple. A grease nipple for the shaft is available to maintain the shaft for the pulley sheave. Please ensure this is greased before use.  8 Tonne Unit weight is 2.075Kg 

Get Your Recovery Done Fast! with a Carbon Shinbusta Recovery Hook! This is an absolute beast of a recovery hook. Stand out from the crowd and flex on all your mates!  Simple and easy to secure your recovery rope or shackle to the hook No messing around with steel or soft shackles Easy to fit - suits standard 50x50mm hitch receiver Eliminate dangerous towball recoveries Made from Solid Forged Steel  Independant tested (NATA accredited facility in Australia) Covered by our Carbon lifetime replacement product guarantee Smooth Hi-vis red powdercoat finish     Do it the easy way with the Carbon Offroad Shinbusta Recovery Hook. Easily throw your recovery strap loop over the hook and simply tow them out! The Shinbusta Recovery Hook has been tested by a NATA endorsed Independant testing facility (Mech Test) here in Brisbane - Australia, to meet our rigorous demands on recovery gear. Give your 4wd some attitude with Carbon!   Specs. 8000kg Rating Capacity Destruction tested to 16000kg by Nata accredited testing agent (Mech Test Brisbane) WLL - 4535 kg  (WLL= Working Load Limit this is a rating for continuous use) Made from durable solid forged steel Heat treated for extra strength Suits 50x50mm standard receiver hitch Soft or bow shackle compatible Recovery rope or strap compatible Suit 16mm or 5/8" standard hitch pin Hi-vis Smooth red powder coat for great visibility and rust protection 300mm Long (total length) x 50mm wide x 120mm high 225mm (from hitch pin hole to inside hook) 4.0KG Please note This device is only to be used for offroad 4x4 vehicle recoveries This is not a towing device Only for straight line recoveries Please be aware of your vehicle's tow hitch rating  Designed only for vehicle recoveries  Does not include hitch pin Must be mounted with open hook pointed upwards (to prevent recovery attachment e.g rope from falling out) Must only be used with rated recovery gear    

Save $$$ Get 2 x Gear Cubes for a steal of a price! Includes removeable internal sections   The Carbon Offroad Gear Cube recovery and storage bags are the ultimate in storage integration systems for various vehicle configurations.  Because they're designed so seamlessly they integrate into any vehicle configuration--whether you have drawer systems, canopy installations or simply throwing them into the footwell of your passenger seat.  These storage cubes also give you visibility over contents at all times thanks to their tinted clear top with a sturdy construction made from tough but lightweight vinyl where you can easily clean up spills and leaks from food,or mud and dirt from your recovery gear.   You can never be too prepared when you're on the road. Who knows what could happen and it's always good to have an extra bag or two for storage? The Carbon Offroad Gear Cube recovery and storage bags are designed with this in mind, allowing drivers of all sorts a way to store your gear without having it sit around loose in your vehicle which will inevitably get tossed about during any type of ride. These clever cubes come equipped with straps that allow you to secure them into place so there is no risk they'll fly out or otherwise lose their contents while being transported over rugged terrain. or simply slip into your drawers system or canopy build.   Gear Cube Features:  Large Size:  50cm wide x 40cm long x 18cm high Double layer 500 denier PVC waterproof canvas with EPDM sponge rubber internal structure which is a high-quality, closed-cell material that is commonly used to create an air and watertight seal, meaning this foam will never absorb water or lose it's structural properties. The bags maintain a very solid structure, even when loaded up, which means it's easier to handle when packing away or putting back into a vehicle.  Unique Carbon Camo pattern, a stylish and attractive pattern in shades of grey which allow it to blend into most vehicle interiors.  Bright orange zip unit allowing easy identification of the opening section in low light conditions, and easy to spot if you leave it lying on the side of the track Black tinted PVC clear bag top. The black tint offers some additional security to prying eyes and provides a much better outcome against UV degradation of the material over time.  1.5 inch wide webbing straps allow secure carriage of the bags, we have tested the bags up to 20kg load with no failure on straps or stitching Removeable Internal sections which allow organisation are secured with heavy-duty velcro, allowing you to seperate recovery or other items like steel d-shackles and snatch blocks from each other eliminating noise from steel on steel contact while out on the road. Two of these sections include heavy duty mesh zippered pockets for small items allowing sensible packing and easy access when required.   The bag straps can be lifted over the top of the bag allowing it to be dropped into a drawer system and then easily removed. The zipper can be accessed while the bag is packed inside a drawer unit. 

Save $$$ Get 2 x Gear Cubes for a steal of a price! Includes removeable internal sections   The Carbon Offroad Gear Cube recovery and storage bags are the ultimate in storage integration systems for various vehicle configurations.  Because they're designed so seamlessly they integrate into any vehicle configuration--whether you have drawer systems, canopy installations or simply throwing them into the footwell of your passenger seat.  These storage cubes also give you visibility over contents at all times thanks to their tinted clear top with a sturdy construction made from tough but lightweight vinyl where you can easily clean up spills and leaks from food,or mud and dirt from your recovery gear.   You can never be too prepared when you're on the road. Who knows what could happen and it's always good to have an extra bag or two for storage? The Carbon Offroad Gear Cube recovery and storage bags are designed with this in mind, allowing drivers of all sorts a way to store your gear without having it sit around loose in your vehicle which will inevitably get tossed about during any type of ride. These clever cubes come equipped with straps that allow you to secure them into place so there is no risk they'll fly out or otherwise lose their contents while being transported over rugged terrain. or simply slip into your drawers system or canopy build.   Gear Cube Features:  Compact Size:  40cm wide x 30cm long x 18cm high Double layer 500 denier PVC waterproof canvas with EPDM sponge rubber internal structure which is a high-quality, closed-cell material that is commonly used to create an air and watertight seal, meaning this foam will never absorb water or lose it's structural properties. The bags maintain a very solid structure, even when loaded up, which means it's easier to handle when packing away or putting back into a vehicle.  Unique Carbon Camo pattern, a stylish and attractive pattern in shades of grey which allow it to blend into most vehicle interiors.  Bright orange zip unit allowing easy identification of the opening section in low light conditions, and easy to spot if you leave it lying on the side of the track Black tinted PVC clear bag top. The black tint offers some additional security to prying eyes and provides a much better outcome against UV degradation of the material over time.  1.5 inch wide webbing straps allow secure carriage of the bags, we have tested the bags up to 20kg load with no failure on straps or stitching Removeable Internal sections which allow organisation are secured with heavy-duty velcro, allowing you to seperate recovery or other items like steel d-shackles and snatch blocks from each other eliminating noise from steel on steel contact while out on the road. Two of these sections include heavy duty mesh zippered pockets for small items allowing sensible packing and easy access when required.   The bag straps can be lifted over the top of the bag allowing it to be dropped into a drawer system and then easily removed. The zipper can be accessed while the bag is packed inside a drawer unit. 

Save $$$ and get a Carbon 10,000kg Winch Rope Thimble and Carbon Monkey Fist 13000kg Soft Shackle Combo Deal!   Carbon Winch Rope Thimble Information - Closed loop Winching 10,000KG The Carbon Offroad Monkey Fist winch rope thimble is a great bit of kit. Stop cutting your hands up on old winch hooks with nasty spring gates, this winch thimble offers a user friendly experience when it comes to setting up a winch recovery.  The thimble is simply pulled into the fairlead for storage, it is perfectly sized to grab hold of with one hand, leaving the other hand free to help scramble up a hill, or connect up a shackle.  With a 6061 T6 Alloy CNC machined section of billet alloy, this is one sexy bit of gear. Make a statement, get rid of your old hook and get this functional piece of winching gear on your rig. It is Type 3 hard anodised to Milspec requirements allowing your investment in good gear to last through the course of time in our harsh Australian conditions.  The attachment point is compatible with synthetic rope soft shackles and also 4.25T steel bow shackles. The nice radius edges on the mounting eye will not damage your soft shackle. The circlip secured winch rope pin mount means you don't have to stuff around with splicing this onto your winch rope, simply remove the hook and replace with our winch thimble.      Carbon Monkey Fist Soft Shackle Infomation - New Orange/Black Colour!!!! The Carbon Offroad Monkey Fist Soft Shackle is an absolute winner! The 10mm UHMWPE rope is rated at 13 tonnes minimum breaking strain and with a super heavy duty braided tight sheath over the core, this shackle is built to take some abuse.  Mininum Breaking Strain - 13209KG The oversized Monkey Fist knot will ensure that there is Zero chance of the shackle ever coming apart during a recovery.  The braided heavy duty sheath allows you to go straight through a regular recovery point. Make sure it's in good nick though as the shackles can be damaged if the recovery point has nicks and burrs from previous use.  Easy disassembly of the shackle after load is applied is just as easy if not easier than a steel shackle.  You can use rope shackles for a number of uses:  Connecting your vehicle to a snatch strap or kinetic rope Connecting a tree trunk protector strap to the winch hook Connecting two straps together to extend your reach.  It also gives you further options like using it as an attachment point around a chassis rail or crossmember Includes storage bag

Save $$$ and get a Carbon Analogue Tyre Deflator and Carbon Monkey Fist 13000kg Soft Shackle Combo Deal!   Carbon Offroad Speedy Tyre Deflator/ Pressure Guage Get let down fast! with Carbon's Tyre Deflator - Glows in the Dark Simply use it to see your tyre pressures or use it to deflate your tyres before heading offroad or on the beach. Simple and easy to use. The most effective way to improve your offroad traction and performance is easy as, by letting the air out of your tyres. You'll love using it with its super smooth operation. - Easy to Read Display (Glows in the Dark!) - Stainless Steel Braided Heavy Duty Hose - High Quality Brass Tyre Coupler - Swivel head - Rubber Gauge outer for Maximum Protection - Display in PSI  - 0-60 PSI Range - 12 Months Warranty Includes - 1 x AnalogueTyre Deflator/Gauge - 4 x tyre Valve Caps - 4 x Tyre Valves - 1 x Tyre Valve remover - 1 x Carry Case   Carbon Monkey Fist Soft Shackle Infomation - New Orange/Black Colour!!!! The Carbon Offroad Monkey Fist Soft Shackle is an absolute winner! The 10mm UHMWPE rope is rated at 13 tonnes minimum breaking strain and with a super heavy duty braided tight sheath over the core, this shackle is built to take some abuse.  Mininum Breaking Strain - 13209KG The oversized Monkey Fist knot will ensure that there is Zero chance of the shackle ever coming apart during a recovery.  The braided heavy duty sheath allows you to go straight through a regular recovery point. Make sure it's in good nick though as the shackles can be damaged if the recovery point has nicks and burrs from previous use.  Easy disassembly of the shackle after load is applied is just as easy if not easier than a steel shackle.  You can use rope shackles for a number of uses:  Connecting your vehicle to a snatch strap or kinetic rope Connecting a tree trunk protector strap to the winch hook Connecting two straps together to extend your reach.  It also gives you further options like using it as an attachment point around a chassis rail or crossmember Includes storage bag

Save $$$ and get a Carbon Digital Tyre Deflator and Carbon Monkey Fist 13000kg Soft Shackle Combo Deal!   Carbon Offroad Digital Speedy Tyre Deflator/ Pressure Gauge Get let down fast! with Carbon's Digital Tyre deflator Simply use it to see your tyre pressures or use it to deflate your tyres before heading offroad or on the beach. Simple and easy to use. The most effective way to improve your offroad traction and performance is easy as, by letting the air out of your tyres. You'll love using it with its super smooth operation. - EL LED Backlit Digital Display  - Stainless Steel Braided Heavy Duty Hose - High Quality Brass Tyre Coupler - Swivel head - Rubber Gauge outer for Maximum Protection - 0.1% Accuracy - Display in PSI BAR KPA KG/CM  - 0-100 PSI Range - Powered by 2 x AAA Batteries - Battery Power Level Display - 12 Months Warranty - Auto Backlight - Off after 40 seconds - Auto Power Off  - after 2 minutes Includes - 1 x Digital Tyre Deflator/Gauge - 4 x tyre Valve Caps - 4 x Tyre Valves - 1 x Tyre Valve remover - 2 x AAA Batteries - 1 x Carry Case     Carbon Monkey Fist Soft Shackle Infomation - New Orange/Black Colour!!!! The Carbon Offroad Monkey Fist Soft Shackle is an absolute winner! The 10mm UHMWPE rope is rated at 13 tonnes minimum breaking strain and with a super heavy duty braided tight sheath over the core, this shackle is built to take some abuse.  Mininum Breaking Strain - 13209KG The oversized Monkey Fist knot will ensure that there is Zero chance of the shackle ever coming apart during a recovery.  The braided heavy duty sheath allows you to go straight through a regular recovery point. Make sure it's in good nick though as the shackles can be damaged if the recovery point has nicks and burrs from previous use.  Easy disassembly of the shackle after load is applied is just as easy if not easier than a steel shackle.  You can use rope shackles for a number of uses:  Connecting your vehicle to a snatch strap or kinetic rope Connecting a tree trunk protector strap to the winch hook Connecting two straps together to extend your reach.  It also gives you further options like using it as an attachment point around a chassis rail or crossmember Includes storage bag

Double your line pull with a Carbon Offroad  ATV/ UTV  Snatch block pulley  - 4000kg rating - Makes it easier to recovery your ATV - Less strain on your winch