![VW Amarok 3.0L 2.0L 2.5 inch Monotube IFP Coilover and Rear Shock Suspension Kit - MT-25-VW-AMAROK 1](http://www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_375x.jpg?v=1689813344 375w,//www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_410x.jpg?v=1689813344 410w,//www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_520x.jpg?v=1689813344 520w,//www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_576x.jpg?v=1689813344 576w,//www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_768x.jpg?v=1689813344 768w,//www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_992x.jpg?v=1689813344 992w,//www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_1024x.jpg?v=1689813344 1024w,//www.carbonoffroadusa.com/cdn/shop/products/vw-amarok-30l-20l-25-inch-monotube-ifp-coilover-and-rear-shock-suspension-kit-693949_1280x.jpg?v=1689813344 1280w)
Carbon Offroad
VW Amarok 3.0L 2.0L 2.5 inch Monotube IFP Coilover and Rear Shock Suspension Kit
$2,183.00
After more than 3 years of R&D we have finally got our Amarok 2.5 inch IFP monotube Coilovers and 2.0 IFP Rear shock kit in production from Carbon Winches & Offroad Products Australia.
This shock setup has been on vehicles and tested here in Aus over the last few years, after 4 versions of prototyping and fine tuning we have been able to get all allowable travel with stock and aftermarket UCA installed for both V6 and 2.0L Roks. We decided to run with a 2.0 rear shock mainly due to the 2.5 inch inverted housing fitment causing clearance issues on tanks. Given the fact that the piston in our shock is much larger than stock and all twin tube shock options, there is no detriment to running a smaller body shock on the rear.
The coil spring is custom made to our specifications. It features a progressive rate winding which provides excellent on-road daily driving comfort which the Roks are known for, so you don't lose this with this upgrade, and combined with the preload adjustable coil seat, the ability to dial in the ride height exactly where you need it. Depending on your accessory load we have a few different coilover coils to suit your setup.
So what does it cost? You'll be glad to know that this will be the best priced premium shock setup in the world for this rig. With a package price you get:
2 x 2.5 IFP front coilovers,
2 x choice of coilover coils to suit your vehicle
2 x Alloy top hats
2 x shaft spacers (fit only if vehicle has diff drop) - offers slightly more travel for diff drop fitted vehicles.
1 x Coilover preassembly included
2 x Brand new HD adjustable sway bar links
2 x 2.0 IFP Rear Shocks 1 x Coilover adjuster spanner. - 2.0 body fitted due to clearance issues with some models. Leaf springs provide a lot of damping control along with
The quality of manufacturing is up there with the best on the market, we have not cut corners to deliver this package to market.
International Customers Please Note: Are you outside of Australia and interested to purchase? We can help you. Please email us directly at sales@carbonoffroad.com.au to obtain a quote including shipping to your location.
![MT2.0 Fits Toyota Hilux N70 Vigo Strut Shock Kit 2-3 Inch - MT20-TOYOTA-HILUX-N70 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_375x.jpg?v=1677024538 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_410x.jpg?v=1677024538 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_520x.jpg?v=1677024538 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_576x.jpg?v=1677024538 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_768x.jpg?v=1677024538 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_992x.jpg?v=1677024538 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_1024x.jpg?v=1677024538 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-strut-shock-kit-2-3-inch-413886_1280x.jpg?v=1677024538 1280w)
![MT2.0 Fits Toyota Hilux N70 Vigo Strut Shock Kit 2-3 Inch - MT20-TOYOTA-HILUX-N70 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_375x.jpg?v=1688457712 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_410x.jpg?v=1688457712 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_520x.jpg?v=1688457712 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_576x.jpg?v=1688457712 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_768x.jpg?v=1688457712 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_992x.jpg?v=1688457712 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_1024x.jpg?v=1688457712 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_1280x.jpg?v=1688457712 1280w)
Carbon Offroad
MT2.0 Fits Toyota Hilux N70 Vigo Strut Shock Kit 2-3 Inch
$916.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Rear Shock Absorbers - Comfort design valving
Rear shocks are long travel and suit a 2-3 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT2.0 Fits Toyota Hilux N70 Vigo Front Adjustable Struts 2-3 Inch - MT20-TOYOTA-HILUX-N70_FPR 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_375x.jpg?v=1677024514 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_410x.jpg?v=1677024514 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_520x.jpg?v=1677024514 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_576x.jpg?v=1677024514 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_768x.jpg?v=1677024514 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_992x.jpg?v=1677024514 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_1024x.jpg?v=1677024514 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n70-vigo-front-adjustable-struts-2-3-inch-345017_1280x.jpg?v=1677024514 1280w)
![MT2.0 Fits Toyota Hilux N70 Vigo Front Adjustable Struts 2-3 Inch - MT20-TOYOTA-HILUX-N70_FPR 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_375x.jpg?v=1688457764 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_410x.jpg?v=1688457764 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_520x.jpg?v=1688457764 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_576x.jpg?v=1688457764 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_768x.jpg?v=1688457764 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_992x.jpg?v=1688457764 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_1024x.jpg?v=1688457764 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n70_fpr_1280x.jpg?v=1688457764 1280w)
Carbon Offroad
MT2.0 Fits Toyota Hilux N70 Vigo Front Adjustable Struts 2-3 Inch
$638.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut .
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT2.0 Nissan Patrol Y60 Y61 GQ GU Shock Kit 2 Inch - MT20-NISSAN-Y60-61 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_375x.jpg?v=1689812931 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_410x.jpg?v=1689812931 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_520x.jpg?v=1689812931 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_576x.jpg?v=1689812931 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_768x.jpg?v=1689812931 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_992x.jpg?v=1689812931 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_1024x.jpg?v=1689812931 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-537855_1280x.jpg?v=1689812931 1280w)
![MT2.0 Nissan Patrol Y60 Y61 GQ GU Shock Kit 2 Inch - MT20-NISSAN-Y60-61 2](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_375x.jpg?v=1689812931 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_410x.jpg?v=1689812931 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_520x.jpg?v=1689812931 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_576x.jpg?v=1689812931 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_768x.jpg?v=1689812931 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_992x.jpg?v=1689812931 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_1024x.jpg?v=1689812931 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60-y61-gq-gu-shock-kit-2-inch-413837_1280x.jpg?v=1689812931 1280w)
Carbon Offroad
MT2.0 Nissan Patrol Y60 Y61 GQ GU Shock Kit 2 Inch
$661.00
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front and Rear Shock Absorbers - Comfort design valving
Front and Rear shocks are long travel and suit a 2 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT2.0 Holden Colorado 2012-2020 Strut Shock Kit 2-3 Inch - MT20-HOLDEN-COL-12 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_375x.jpg?v=1677024592 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_410x.jpg?v=1677024592 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_520x.jpg?v=1677024592 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_576x.jpg?v=1677024592 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_768x.jpg?v=1677024592 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_992x.jpg?v=1677024592 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_1024x.jpg?v=1677024592 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-strut-shock-kit-2-3-inch-866890_1280x.jpg?v=1677024592 1280w)
![MT2.0 Holden Colorado 2012-2020 Strut Shock Kit 2-3 Inch - MT20-HOLDEN-COL-12 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_375x.jpg?v=1688456454 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_410x.jpg?v=1688456454 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_520x.jpg?v=1688456454 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_576x.jpg?v=1688456454 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_768x.jpg?v=1688456454 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_992x.jpg?v=1688456454 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_1024x.jpg?v=1688456454 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_1280x.jpg?v=1688456454 1280w)
Carbon Offroad
MT2.0 Holden Colorado 2012-2020 Strut Shock Kit 2-3 Inch
$916.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Rear Shock Absorbers - Comfort design valving
Rear shocks are long travel and suit a 2-3 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT 2.0 Ford Ranger PX3 2018 Strut Shock Kit 2-3 Inch - MT20-FORD-RAN-PX3 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_375x.jpg?v=1677024502 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_410x.jpg?v=1677024502 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_520x.jpg?v=1677024502 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_576x.jpg?v=1677024502 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_768x.jpg?v=1677024502 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_992x.jpg?v=1677024502 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_1024x.jpg?v=1677024502 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-strut-shock-kit-2-3-inch-762427_1280x.jpg?v=1677024502 1280w)
![MT 2.0 Ford Ranger PX3 2018 Strut Shock Kit 2-3 Inch - MT20-FORD-RAN-PX3 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_375x.jpg?v=1688456365 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_410x.jpg?v=1688456365 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_520x.jpg?v=1688456365 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_576x.jpg?v=1688456365 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_768x.jpg?v=1688456365 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_992x.jpg?v=1688456365 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_1024x.jpg?v=1688456365 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_1280x.jpg?v=1688456365 1280w)
Carbon Offroad
MT 2.0 Ford Ranger PX3 2018 Strut Shock Kit 2-3 Inch
$916.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Rear Shock Absorbers - Comfort design valving
Rear shocks are long travel and suit a 2-3 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![Carbon Offroad Strut Mount Suits ? Holden Colorado RG - RG2 / Isuzu D-Max 2012 On / Mazda BT50 2021 On - CW-SM5 1](http://www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_375x.jpg?v=1676962864 375w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_410x.jpg?v=1676962864 410w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_520x.jpg?v=1676962864 520w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_576x.jpg?v=1676962864 576w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_768x.jpg?v=1676962864 768w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_992x.jpg?v=1676962864 992w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_1024x.jpg?v=1676962864 1024w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-strut-mount-suits-holden-colorado-rg-rg2-isuzu-d-max-2012-on-mazda-bt50-2021-on-454991_1280x.jpg?v=1676962864 1280w)
Carbon Offroad
Carbon Offroad Strut Mount Suits ? Holden Colorado RG - RG2 / Isuzu D-Max 2012 On / Mazda BT50 2021 On CW-SM5
$48.00
Carbon Offroad OE Style Strut Mount to suit Holden Colorado RG - RG2 / Isuzu D-Max 2012 On / Mazda BT50 2021 On - Sold as Each
![Carbon Offroad 3.0 inch ID, 14 inch, coilover coil spring 0-70kg load - CC-14-D 1](http://www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_375x.jpg?v=1676962724 375w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_410x.jpg?v=1676962724 410w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_520x.jpg?v=1676962724 520w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_576x.jpg?v=1676962724 576w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_768x.jpg?v=1676962724 768w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_992x.jpg?v=1676962724 992w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_1024x.jpg?v=1676962724 1024w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-30-inch-id-14-inch-coilover-coil-spring-0-70kg-load-662379_1280x.jpg?v=1676962724 1280w)
Carbon Offroad
Carbon Offroad 3.0 inch ID, 14 inch, coilover coil spring 700LB
$109.00
Carbon Offroad Coilover Coil Springs
Carbon's professionally engineered progressive rate coil springs were specifically designed here in Australia and offer an improved ride quality over the factory spring on your 4x4. The natural progression of this design is to be tough enough with increased rates designed for additional accessory loads and still maintain a driver friendly feel. The Carbon Coil Springs are designed to work with the range of Carbon MT2.0 Struts.
What makes the Carbon Coil Spring better than other springs on the market?
Our focus on the Carbon Coil Spring was to deliver to the market a suspension system that is comfortable on road and can handle additional accessory loads and improve the vehicle on road handling, then while offroad with increases with travel and improved articulation, this has been done by utilising our own custom progresive rate coil design specifically to suit 4wd's alike.
Driving comfort never felt so good.
Designed to offer you a smooth riding experience, the Carbon 4x4 Coil Springs takes an already great product and makes it even better. The special formulated spring steel used resists fatigue and sagging and is powder coated for protection against the elements for longevity.
The linear rate elements with these coils, ensures reliable performance. Large bumps in the road will be soaked up without transmitting that force to your chassis thanks to its unequaled ability to flex evenly and uniformly under load.
If you want the ride you deserve, upgrade to a set of Carbon Coil Springs for your 4wd.
Manufacturing processes -
- Manufactured from high grade carbon spring steel.
- CNC mandrel bent for a precise manufacturing process.
- Each spring is scragged (compressed to coil bind to set the spring height)
- The outer surface of the coil is blasted with steel bearings to relieve the surface tension for a uniformed finish.
- Powder coated for protection from rust and corrosion.
- Each coil is checked ensuring a high level of quality control.
- For universal coil over applications, both ends are ground flat for an even mating surface.
14 inch free height
linear rate design
0-70kg constant load on front end of most dual cabs
flat ground ends
3.0 inch inside diameter, will work on Carbon MT2.0 coilovers, Fox 2.0 IFP coilovers. Fox 2.5 series coilovers, King 2.5 coilovers, Radflo 2.5 coilovers, Icon 2.5 coilovers and any other brand that takes a 3 inch ID coilover spring.
![MT2.0 Holden Colorado 2012-2020 Front Adjustable Struts 2-3 Inch - MT20-HOLDEN-COL-12_FPR 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_375x.jpg?v=1677024577 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_410x.jpg?v=1677024577 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_520x.jpg?v=1677024577 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_576x.jpg?v=1677024577 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_768x.jpg?v=1677024577 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_992x.jpg?v=1677024577 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_1024x.jpg?v=1677024577 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-holden-colorado-2012-2020-front-adjustable-struts-2-3-inch-265838_1280x.jpg?v=1677024577 1280w)
![MT2.0 Holden Colorado 2012-2020 Front Adjustable Struts 2-3 Inch - MT20-HOLDEN-COL-12_FPR 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_375x.jpg?v=1688456509 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_410x.jpg?v=1688456509 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_520x.jpg?v=1688456509 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_576x.jpg?v=1688456509 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_768x.jpg?v=1688456509 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_992x.jpg?v=1688456509 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_1024x.jpg?v=1688456509 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-holden-col-12_fpr_1280x.jpg?v=1688456509 1280w)
Carbon Offroad
MT2.0 Holden Colorado 2012-2020 Front Adjustable Struts 2-3 Inch
$638.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut .
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![Carbon Offroad Isuzu D-MAX / MUX Ball Joint Spacer for 2+ inch lift - BJS-ISUZ 1](http://www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_375x.jpg?v=1676962827 375w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_410x.jpg?v=1676962827 410w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_520x.jpg?v=1676962827 520w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_576x.jpg?v=1676962827 576w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_768x.jpg?v=1676962827 768w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_992x.jpg?v=1676962827 992w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_1024x.jpg?v=1676962827 1024w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-offroad-isuzu-d-max-mux-ball-joint-spacer-for-2-inch-lift-920747_1280x.jpg?v=1676962827 1280w)
Carbon Offroad
Carbon Offroad Isuzu D-MAX / MUX Ball Joint Spacer for 2+ inch lift
$86.00
These ball joint spacers work with factory upper control arms to space the balljoint down off the arm to help with achieving correct wheel alignments with lifts from 2 inches and above. The kit includes two spacers. You may need to souce longer bolts to use with these spacers.
![MT 2.0 Nissan Navara NP300 D23 Strut Shock Kit 2-3 Inch-Coil Rear - MT20-NIS-NP300-D23 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_375x.jpg?v=1677024521 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_410x.jpg?v=1677024521 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_520x.jpg?v=1677024521 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_576x.jpg?v=1677024521 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_768x.jpg?v=1677024521 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_992x.jpg?v=1677024521 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_1024x.jpg?v=1677024521 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-np300-d23-strut-shock-kit-2-3-inch-coil-rear-781873_1280x.jpg?v=1677024521 1280w)
![MT 2.0 Nissan Navara NP300 D23 Strut Shock Kit 2-3 Inch-Coil Rear - MT20-NIS-NP300-D23 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_375x.jpg?v=1688457372 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_410x.jpg?v=1688457372 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_520x.jpg?v=1688457372 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_576x.jpg?v=1688457372 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_768x.jpg?v=1688457372 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_992x.jpg?v=1688457372 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_1024x.jpg?v=1688457372 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-np300-d23_1280x.jpg?v=1688457372 1280w)
Carbon Offroad
MT 2.0 Nissan Navara NP300 D23 Strut Shock Kit 2-3 Inch-Coil Rear
$916.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Rear Shock Absorbers - Comfort design valving
Rear shocks are long travel and suit a 2-3 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![RR 2.0 Suzuki Jimny 2019+ Front / Rear Remote Res. Shock Kit - RR20-JIMNY-19KIT 1](http://www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_375x.jpg?v=1689813211 375w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_410x.jpg?v=1689813211 410w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_520x.jpg?v=1689813211 520w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_576x.jpg?v=1689813211 576w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_768x.jpg?v=1689813211 768w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_992x.jpg?v=1689813211 992w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_1024x.jpg?v=1689813211 1024w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-234446_1280x.jpg?v=1689813211 1280w)
![RR 2.0 Suzuki Jimny 2019+ Front / Rear Remote Res. Shock Kit - RR20-JIMNY-19KIT 2](http://www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_375x.jpg?v=1689813211 375w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_410x.jpg?v=1689813211 410w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_520x.jpg?v=1689813211 520w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_576x.jpg?v=1689813211 576w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_768x.jpg?v=1689813211 768w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_992x.jpg?v=1689813211 992w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_1024x.jpg?v=1689813211 1024w,//www.carbonoffroadusa.com/cdn/shop/products/rr-20-suzuki-jimny-2019-front-rear-remote-res-shock-kit-433302_1280x.jpg?v=1689813211 1280w)
Carbon Offroad
RR 2.0 Suzuki Jimny 2019+ Front / Rear Remote Res. Shock Kit
$1,600.00
Carbon RR 2.0 Premium Monotube Shock Absorbers
So you've got the coolest Suzuki 4x4 that has EVER been produced!
You want your rig to stand out, be seen and show up those bigger 4x4s with the only remote reservoir shocks available on the market from Carbon Offroad.
Having remote reservoir shocks on your Suzuki Jimny will be one of the best decisions you will EVER make!
Check out roam_zilla on Instagram if you want to know first hand experience with these shocks
Complete kit includes (STD - 2 INCH)
2 x Front Carbon 2.0RR Shocks Absorbers - Includes rubber boots and remote res mounting brackets.
2 x Rear Carbon 2.0RR Shock Absorbers- Includes rubber boots and remote res mounting brackets.
Process -The shock development hasn't been short, the Carbon RR 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound dampening forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon RR2.0 Shocks we are able to offer up to 110% more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, the Carbon RR has a thickness of 3.75mm for maximum strength, durability and piece of mind.
Get the Ultimate in Comfort & Control
The Carbon RR2.0 uses advanced technology to deliver a superior ride quality using a Multi-Stage Velocity Sensitive Piston Valve. That senses the terrain and adjusts according to the driving conditions
Build Quality - Simply by looking at the Carbon RR2.0's you can tell that they are of high quality with high quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market.
Australian Warranty - Backed by a real 3 year/100,000 Km
You wont just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference
Carbon RR2.0 Remote Resovoir Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
Remote Res.- 360 degree swivel joint, tough flexible high pressure hose
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![RR2.0 Suzuki Jimny 2019 Rear Remote Res Shock 2-3](http://www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_375x.jpg?v=1693977680 375w,//www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_410x.jpg?v=1693977680 410w,//www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_520x.jpg?v=1693977680 520w,//www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_576x.jpg?v=1693977680 576w,//www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_768x.jpg?v=1693977680 768w,//www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_992x.jpg?v=1693977680 992w,//www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_1024x.jpg?v=1693977680 1024w,//www.carbonoffroadusa.com/cdn/shop/files/rr20-suzuki-jimny-2019-rear-remote-res-shock-2-3-527651_b488814a-c8a2-43c4-a8e1-c1bfd1d6db3f_1280x.jpg?v=1693977680 1280w)
Carbon Offroad
RR2.0 Suzuki Jimny 2019 Rear Remote Res Shock 2-3"
$355.00
$418.00
Carbon RR2.0 Remote Resovoir Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
Remote Res.- 360 degree swivel joint, tough flexible high pressure hose
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![Carbon RR2.0 Suzuki Jimny YR. 19 Front Remote Res. Shock 2](http://www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_375x.jpg?v=1693977656 375w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_410x.jpg?v=1693977656 410w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_520x.jpg?v=1693977656 520w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_576x.jpg?v=1693977656 576w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_768x.jpg?v=1693977656 768w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_992x.jpg?v=1693977656 992w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_1024x.jpg?v=1693977656 1024w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-rr20-suzuki-jimny-yr-19-front-remote-res-shock-2-3-489704_9eaa018d-ca44-47c7-9a6d-5149da04924a_1280x.jpg?v=1693977656 1280w)
Carbon Offroad
Carbon RR2.0 Suzuki Jimny YR. 19 Front Remote Res. Shock 2"
$355.00
$418.00
Carbon RR2.0 Remote Resovoir Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
Remote Res.- 360 degree swivel joint, tough flexible high pressure hose
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![MT2.0 Fits Toyota Hilux N80 Revo Strut Shock Kit 2-3 Inch - MT20-TOYOTA-HILUX-N80 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_375x.jpg?v=1677024547 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_410x.jpg?v=1677024547 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_520x.jpg?v=1677024547 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_576x.jpg?v=1677024547 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_768x.jpg?v=1677024547 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_992x.jpg?v=1677024547 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_1024x.jpg?v=1677024547 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-strut-shock-kit-2-3-inch-729132_1280x.jpg?v=1677024547 1280w)
![MT2.0 Fits Toyota Hilux N80 Revo Strut Shock Kit 2-3 Inch - MT20-TOYOTA-HILUX-N80 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_375x.jpg?v=1688457783 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_410x.jpg?v=1688457783 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_520x.jpg?v=1688457783 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_576x.jpg?v=1688457783 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_768x.jpg?v=1688457783 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_992x.jpg?v=1688457783 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_1024x.jpg?v=1688457783 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_1280x.jpg?v=1688457783 1280w)
Carbon Offroad
MT2.0 Fits Toyota Hilux N80 Revo Strut Shock Kit 2-3 Inch
$916.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Rear Shock Absorbers - Comfort design valving
Rear shocks are long travel and suit a 2-3 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT2.0 Isuzu D-MAX 2012-2020 Front Adjustable Struts 2-3 Inch - MT20-ISUZU-DMAX-2012_FPR 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_375x.jpg?v=1677024594 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_410x.jpg?v=1677024594 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_520x.jpg?v=1677024594 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_576x.jpg?v=1677024594 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_768x.jpg?v=1677024594 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_992x.jpg?v=1677024594 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_1024x.jpg?v=1677024594 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-isuzu-d-max-2012-2020-front-adjustable-struts-2-3-inch-316380_1280x.jpg?v=1677024594 1280w)
![MT2.0 Isuzu D-MAX 2012-2020 Front Adjustable Struts 2-3 Inch - MT20-ISUZU-DMAX-2012_FPR 2](http://www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_375x.png?v=1688456663 375w,//www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_410x.png?v=1688456663 410w,//www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_520x.png?v=1688456663 520w,//www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_576x.png?v=1688456663 576w,//www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_768x.png?v=1688456663 768w,//www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_992x.png?v=1688456663 992w,//www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_1024x.png?v=1688456663 1024w,//www.carbonoffroadusa.com/cdn/shop/files/mt20isuzudmax2012_fpr_1280x.png?v=1688456663 1280w)
Carbon Offroad
MT2.0 Isuzu D-MAX 2012-2020 Front Adjustable Struts 2-3 Inch
$638.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut .
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT2.0 Fits Toyota Hilux N80 Revo Front Adjustable Struts 2-3 Inch - MT20-TOYOTA-HILUX-N80_FPR 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_375x.jpg?v=1677024523 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_410x.jpg?v=1677024523 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_520x.jpg?v=1677024523 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_576x.jpg?v=1677024523 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_768x.jpg?v=1677024523 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_992x.jpg?v=1677024523 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_1024x.jpg?v=1677024523 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-fits-toyota-hilux-n80-revo-front-adjustable-struts-2-3-inch-748747_1280x.jpg?v=1677024523 1280w)
![MT2.0 Fits Toyota Hilux N80 Revo Front Adjustable Struts 2-3 Inch - MT20-TOYOTA-HILUX-N80_FPR 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_375x.jpg?v=1688457833 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_410x.jpg?v=1688457833 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_520x.jpg?v=1688457833 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_576x.jpg?v=1688457833 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_768x.jpg?v=1688457833 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_992x.jpg?v=1688457833 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_1024x.jpg?v=1688457833 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-toyota-hilux-n80_fpr_1280x.jpg?v=1688457833 1280w)
Carbon Offroad
MT2.0 Fits Toyota Hilux N80 Revo Front Adjustable Struts 2-3 Inch
$638.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut .
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![GT-28-502](http://www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_375x.jpg?v=1713922037 375w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_410x.jpg?v=1713922037 410w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_520x.jpg?v=1713922037 520w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_576x.jpg?v=1713922037 576w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_768x.jpg?v=1713922037 768w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_992x.jpg?v=1713922037 992w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_1024x.jpg?v=1713922037 1024w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_a67c51cd-9c1d-42cc-beee-2e9079692841_1280x.jpg?v=1713922037 1280w)
Carbon Offroad
GT-28-502
$222.00
$318.00
Price is for 1 x Shock
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![](http://www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_375x.gif 375w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_410x.gif 410w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_520x.gif 520w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_576x.gif 576w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_768x.gif 768w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_992x.gif 992w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1024x.gif 1024w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1280x.gif 1280w)
Carbon Offroad
GT-26-504
$222.00
$318.00
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![GT-26-502](http://www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_375x.jpg?v=1713922019 375w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_410x.jpg?v=1713922019 410w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_520x.jpg?v=1713922019 520w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_576x.jpg?v=1713922019 576w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_768x.jpg?v=1713922019 768w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_992x.jpg?v=1713922019 992w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_1024x.jpg?v=1713922019 1024w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-fits-toyota-lc-7879-rear-shock-2-3-796905_1280x.jpg?v=1713922019 1280w)
Carbon Offroad
GT-26-502
$222.00
$318.00
1 x shock only
Carbon MT 2.0 Monotube Shock Absorbers
Give your Toyota landcruiser 78/79 Series a Birthday with the new MT2.0 Shock kit from Carbon
Get your beast of a 4wd riding comfortably and safely with a new set of shocks!
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![GT-24-522](http://www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_375x.jpg?v=1713922030 375w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_410x.jpg?v=1713922030 410w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_520x.jpg?v=1713922030 520w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_576x.jpg?v=1713922030 576w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_768x.jpg?v=1713922030 768w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_992x.jpg?v=1713922030 992w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_1024x.jpg?v=1713922030 1024w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-nissan-patrol-y60y61-front-monotube-shock-long-travel-3-4-133478_1280x.jpg?v=1713922030 1280w)
Carbon Offroad
GT-24-522
$222.00
$318.00
Price is for 1 x Shock
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![GT-20-719](http://www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_375x.jpg?v=1713922023 375w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_410x.jpg?v=1713922023 410w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_520x.jpg?v=1713922023 520w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_576x.jpg?v=1713922023 576w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_768x.jpg?v=1713922023 768w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_992x.jpg?v=1713922023 992w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_1024x.jpg?v=1713922023 1024w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-ford-everest-2019-front-strut-693443_1280x.jpg?v=1713922023 1280w)
Carbon Offroad
GT-20-719
$245.00
$350.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![MT 2.0 Ford Ranger PX3 2018 Front Adjustable Struts 2-3 Inch - MT20-FORD-RAN-PX3_FPR 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_375x.jpg?v=1677024495 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_410x.jpg?v=1677024495 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_520x.jpg?v=1677024495 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_576x.jpg?v=1677024495 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_768x.jpg?v=1677024495 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_992x.jpg?v=1677024495 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_1024x.jpg?v=1677024495 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-ford-ranger-px3-2018-front-adjustable-struts-2-3-inch-252212_1280x.jpg?v=1677024495 1280w)
![MT 2.0 Ford Ranger PX3 2018 Front Adjustable Struts 2-3 Inch - MT20-FORD-RAN-PX3_FPR 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_375x.jpg?v=1688456412 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_410x.jpg?v=1688456412 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_520x.jpg?v=1688456412 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_576x.jpg?v=1688456412 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_768x.jpg?v=1688456412 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_992x.jpg?v=1688456412 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_1024x.jpg?v=1688456412 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-ford-ran-px3_fpr_1280x.jpg?v=1688456412 1280w)
Carbon Offroad
MT 2.0 Ford Ranger PX3 2018 Front Adjustable Struts 2-3 Inch
$638.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut .
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![Carbon Progressive Rate Coil Spring 40-80kg PAIR - CC-14-A_PAIR 1](http://www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_375x.jpg?v=1676962931 375w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_410x.jpg?v=1676962931 410w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_520x.jpg?v=1676962931 520w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_576x.jpg?v=1676962931 576w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_768x.jpg?v=1676962931 768w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_992x.jpg?v=1676962931 992w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_1024x.jpg?v=1676962931 1024w,//www.carbonoffroadusa.com/cdn/shop/products/carbon-progressive-rate-coil-spring-40-80kg-pair-772212_1280x.jpg?v=1676962931 1280w)
Carbon Offroad
Carbon Progressive Rate Coil Spring 40-80kg PAIR
$211.00
Carbon Offroad Progressive Rate Coilover Coil Springs
Carbon's professionally engineered progressive rate coil springs were specifically designed here in Australia and offer an improved ride quality over the factory spring on your 4x4. The natural progression of this design is to be tough enough with increased rates designed for additional accessory loads and still maintain a driver friendly feel. The Carbon Coil Springs are designed to work with the range of Carbon MT2.0 Struts.
What makes the Carbon Coil Spring better than other springs on the market?
Our focus on the Carbon Coil Spring was to deliver to the market a suspension system that is comfortable on road and can handle additional accessory loads and improve the vehicle on road handling, then while offroad with increases with travel and improved articulation, this has been done by utilising our own custom progresive rate coil design specifically to suit 4wd's alike.
Driving comfort never felt so good.
Designed to offer you a smooth riding experience, the Carbon 4x4 Coil Springs takes an already great product and makes it even better. The special formulated spring steel used resists fatigue and sagging and is powder coated for protection against the elements for longevity.
The progressive rate elements with these coils, ensures large bumps in the road will be soaked up without transmitting that force to your chassis thanks to its unequaled ability to flex evenly and uniformly under load. These are not your typical progressive rate coil springs!
If you want the ride you deserve, upgrade to a set of Carbon Progressive Rate Coil Springs for your 4wd.
Manufacturing processes -
- Manufactured from high grade carbon spring steel.
- CNC mandrel bent for a precise manufacturing process.
- Each spring is scragged (compressed to coil bind to set the spring height)
- The outer surface of the coil is blasted with steel bearings to relieve the surface tension for a uniformed finish.
- Powder coated for protection from rust and corrosion.
- Each coil is checked ensuring a high level of quality control.
- For universal coil over applications, both ends are ground flat for an even mating surface.
14 inch free height
progressive rate design
40-80kg constant load on front end of most dual cabs
flat ground ends
3.0 inch inside diameter, will work on Carbon MT2.0 coilovers, Fox 2.0 IFP coilovers. Fox 2.5 series coilovers, King 2.5 coilovers, Radflo 2.5 coilovers, Icon 2.5 coilovers and any other brand that takes a 3 inch ID coilover spring.
Carbon Offroad 3.0 inch ID, 14 inch, progressive rate coilover coil spring 40-80kg load PAIR
![MT 2.0 Nissan Navara D40 Front Adjustable Struts 2-3 Inch - MT20-NIS-D40_FPR 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_375x.jpg?v=1677024495 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_410x.jpg?v=1677024495 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_520x.jpg?v=1677024495 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_576x.jpg?v=1677024495 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_768x.jpg?v=1677024495 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_992x.jpg?v=1677024495 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_1024x.jpg?v=1677024495 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt-20-nissan-navara-d40-front-adjustable-struts-2-3-inch-486212_1280x.jpg?v=1677024495 1280w)
![MT 2.0 Nissan Navara D40 Front Adjustable Struts 2-3 Inch - MT20-NIS-D40_FPR 2](http://www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_375x.jpg?v=1688457353 375w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_410x.jpg?v=1688457353 410w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_520x.jpg?v=1688457353 520w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_576x.jpg?v=1688457353 576w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_768x.jpg?v=1688457353 768w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_992x.jpg?v=1688457353 992w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_1024x.jpg?v=1688457353 1024w,//www.carbonoffroadusa.com/cdn/shop/files/full-mt20-nis-d40_fpr_1280x.jpg?v=1688457353 1280w)
Carbon Offroad
MT 2.0 Nissan Navara D40 Front Adjustable Struts 2-3 Inch
$638.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT 2.0 Premium Monotube Performance Strut .
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT2.0 Nissan Patrol Y60/Y61 GQ GU Long Travel 3](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_375x.jpg?v=1689812931 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_410x.jpg?v=1689812931 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_520x.jpg?v=1689812931 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_576x.jpg?v=1689812931 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_768x.jpg?v=1689812931 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_992x.jpg?v=1689812931 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_1024x.jpg?v=1689812931 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-349092_1280x.jpg?v=1689812931 1280w)
![MT2.0 Nissan Patrol Y60/Y61 GQ GU Long Travel 3](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_375x.jpg?v=1689812931 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_410x.jpg?v=1689812931 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_520x.jpg?v=1689812931 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_576x.jpg?v=1689812931 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_768x.jpg?v=1689812931 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_992x.jpg?v=1689812931 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_1024x.jpg?v=1689812931 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-nissan-patrol-y60y61-gq-gu-long-travel-3-inch-shock-kit-451039_1280x.jpg?v=1689812931 1280w)
Carbon Offroad
MT2.0 Nissan Patrol Y60/Y61 GQ GU Long Travel 3" - Inch Shock Kit
$661.00
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Shocks Absorbers - Includes rubber boots, bushes
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front and Rear Shock Absorbers - Comfort design valving
Shocks are long travel and suit a 3 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![MT2.0 Toyota 80/105 Series Shock Kit 3-4 Inch - MT20-TOY-80-105-3-4 1](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_375x.jpg?v=1689812934 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_410x.jpg?v=1689812934 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_520x.jpg?v=1689812934 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_576x.jpg?v=1689812934 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_768x.jpg?v=1689812934 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_992x.jpg?v=1689812934 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_1024x.jpg?v=1689812934 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-522482_1280x.jpg?v=1689812934 1280w)
![MT2.0 Toyota 80/105 Series Shock Kit 3-4 Inch - MT20-TOY-80-105-3-4 2](http://www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_375x.jpg?v=1689812934 375w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_410x.jpg?v=1689812934 410w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_520x.jpg?v=1689812934 520w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_576x.jpg?v=1689812934 576w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_768x.jpg?v=1689812934 768w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_992x.jpg?v=1689812934 992w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_1024x.jpg?v=1689812934 1024w,//www.carbonoffroadusa.com/cdn/shop/products/mt20-toyota-80105-series-shock-kit-3-4-inch-890158_1280x.jpg?v=1689812934 1280w)
Carbon Offroad
MT2.0 Toyota 80/105 Series Shock Kit 3-4 Inch
$944.00
Carbon MT 2.0 Premium Monotube Performance Strut and Shock Absorbers.
If you want a smooth ride and improve your 4wd's handling for both on and off-road, get yourself a set of Carbon Premium MT2.0 Monotube Shocks for your 4wd.
We have spent many years developing a ride quality that will give you both comfort and control.
Don't put up with the harsh ride of your factory shocks, ride in comfort and upgrade to Carbon MT2.0.
Build Quality - Simply by looking at the Carbon MT2.0's you can tell that they are of high quality with quality construction and are fully rebuildable with full support with components off the shelf here in Australia.
Philosophy - Our philosophy is simple, Deliver good quality innovative 4wd products that we are proud to deliver to our Australian Market. Australian Warranty - Backed by a real 3 year/100,000 Km
You won't just know the difference that a Carbon Shock can bring to the ride of your 4wd.... You'll feel the difference. Get the Ultimate in Comfort & Control
Advanced Technology -The Carbon MT2.0 uses advanced technology to deliver a superior ride quality using a IFP - Internal Floating Piston that floats between the high pressure Nitrogen Gas and the shock fluid keeping them seperate to prevent cavitation and foaming.The IFP actively works as an internal air bumpstop to help smooth out the harsh bumps and actively senses the terrain and adjusts according to the driving conditions giving you the ultimate in ride quality and control.
What You Get -
2 x Front Carbon MT 2.0 Struts - Includes rubber boots,top hat, bushes,spanner & coil springs.
2 x Rear Carbon MT 2.0 Shock Absorbers - Includes rubber boots & bushes.
Carbon MT2.0 Monotube Front Struts - Comfort design valving
Front Struts are adjustable up to 4 inches of lift
The optimum ride quality is achieved at 2-3 inches of lift.
Please adjust your struts using the supplied C spanner
Ensuring you adjust the spring seat with no load on the Strut ( do not hammer spring seat)
Carbon MT2.0 Monotube Rear Shock Absorbers - Comfort design valving
Rear shocks are long travel and suit a 2-3 inch lift
Shock boots must be used to prevent damage to shock shaft
The shock absorber must be installed with the shaft facing downwards (Inverted design for improved performance)
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
IFP -Internal floating piston for added comfort and control
H/D 3mm Brushed Steel Nickel Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - HIgh quality pure rubber bushes
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seals 5 levels of sealing - 1 x Twin lipped external dust and oil seal 1 x high pressure twin lipped oil seal .1 x high pressure O ring oil seal
Internal fluid - High quality shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
High Pressure Nitrogen Gas Charged - To prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Process -The shock development hasn't been short, the Carbon MT 2.0 Shocks have been rigorously tested here in Australia for the past 3 years on a large selection of vehicles and applications - Landcruiser 79 series, 200 series, Ford Ranger, VW Amarok, Toyota Hilux, Nissan Patrols and Mitsubishi Tritons, with critical feedback from owners of these vehicles to fine tune the dampers to ensure longevity and improve ride control characteristics. These were tested on heavily laden outback tourers, towing vehicles and offroaders wanting maximum flex.
Focus - Our number one goal was to bring to the market an improved ride quality better than what has been on offer to the Australian market. We have achieved this by listening to feedback from 4wd owners and making improvements with compression/rebound damping forces and ensuring ride control is at its optimum.
We understood that most 4wd vehicles currently are "the daily driver" and require a high level of on-road control and comfort but also need to take the abuse of high speed off-road applications like corrugations and out-back dirt driving while offering control in slow off camber situations.
Why Choose Carbon? With the Carbon MT 2.0 Shocks we are able to offer more fluid volume in the shock over an aftermarket 35mm big bore twin tube shock. With this greater oil volume we are able to keep the piston cooler and offer more stable ride control. While most twin tube shocks have an outer wall thickness of only 1.2mm-1.6mm, The Carbon Monotube shocks are built tough with a 3mm thick wall.
![](http://www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_375x.gif 375w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_410x.gif 410w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_520x.gif 520w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_576x.gif 576w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_768x.gif 768w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_992x.gif 992w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1024x.gif 1024w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1280x.gif 1280w)
Carbon Offroad
RR2.5 Fits Ford Ranger PX PX2 Premium Monotube Remote Reservoir Coilover Kit
$3,092.00
$3,637.00
The Carbon Offroad Remote Remote 2.5 inch body monotube shocks kit is a class leader in premium shock manufacturing. Rivalling the other more wel known brands you can be rest assured knowing that we have conducted over 200,000km of on road testing in Australia with absolutely zero seal or component failures during this period and during the initial rollout of product into the market.
Front Shocks feature 22mm diameter shafts for extra strength, with 18mm diameter shafts on the rear shocks.
Complete kit includes (40-75mm Lift Kit)
2 x Front Uprated Carbon Coil Springs
2 x Front Carbon 2.5RR height adjustable struts (inc top hat ) Fully assembled
2 x Rear Carbon 2.5RR Shock Absorbers
1 x Remote reservoir mounting kit for front and rear shocks
1 x Coilover adjuster spanner
**Note the following supporting items are recommended to be used with this kit.
Diff drop kit (for lift over 50mm)
Upper control arms (for lift over 50mm)
Shock Specs:
Monotube Design- Maximum fluid volume and control
3.75mm Brushed Steel Nickle Plated Body - Maximum and strength durability and protection
2.5"/63.5mm Outer Body - Increased fluid volume to prevent fade and improve control
18mm Hardened Chrome H/D Shaft - Tough Shaft and for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or and pure rubber dependant on application - Complete with CNC Alloy Billet Tubes
Billet CNC T6 and Alloy Anodised Shock Body Caps and Mounts
Multi-Stage Velocity Sensitive Piston and Valve and - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal and - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
Carbon Coil Spring and Specifications
Shot Peened - To Stress relieve the outer surface improving coil spring longenvity
Scragged - The coil spring is compressed beyond it's yield point to prevent premature sagging
Coil Spring rates - Rates are chosen to ensure a comfortable ride whilst being able to carry the extra load
Coil Finish - Powder Coated in a sleek matt black and fininsh
High Quality Spring Steel - With increased rates for load carrying
Computer Designed Springs and - For the ultimate in quality
Bar Peeled - To remove surface imperfections
Manufacturing process - Made using computer controlled coil winders for precise fitment and quality control
Note - All heights mentioned are an estimate only and - Vehicle ride heights may vary depending on age, make model, vehicle accessories weight, factory suspension systems
Fitting Note: and Due to the long travel nature of this shock, when fitting check clearance of the lower front strut peg to the inside of the lower strut mount at full droop. Through our R&D we note that the leg gets close at full droop so it may be required to dremel or file for 1mm clearance at full droop. Due to the large tolerances in OE manufacturing, we cannot guarantee it won't clear on every vehicle. The benefit is that you will be getting the most available travel from a bolt on and shocks system in the market.
![GT-26-632](http://www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_375x.jpg?v=1713922026 375w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_410x.jpg?v=1713922026 410w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_520x.jpg?v=1713922026 520w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_576x.jpg?v=1713922026 576w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_768x.jpg?v=1713922026 768w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_992x.jpg?v=1713922026 992w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_1024x.jpg?v=1713922026 1024w,//www.carbonoffroadusa.com/cdn/shop/files/carbon-mt20-holden-trailblazer-yr-12-rear-monotube-shock-510634_1280x.jpg?v=1713922026 1280w)
Carbon Offroad
GT-26-632
$222.00
$318.00
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![](http://www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_375x.gif 375w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_410x.gif 410w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_520x.gif 520w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_576x.gif 576w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_768x.gif 768w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_992x.gif 992w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1024x.gif 1024w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1280x.gif 1280w)
Carbon Offroad
GT-26-539
$222.00
$318.00
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![](http://www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_375x.gif 375w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_410x.gif 410w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_520x.gif 520w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_576x.gif 576w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_768x.gif 768w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_992x.gif 992w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1024x.gif 1024w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1280x.gif 1280w)
Carbon Offroad
GT-24-502
$222.00
$318.00
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots
![](http://www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_375x.gif 375w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_410x.gif 410w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_520x.gif 520w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_576x.gif 576w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_768x.gif 768w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_992x.gif 992w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1024x.gif 1024w,//www.carbonoffroadusa.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1280x.gif 1280w)
Carbon Offroad
GT-23-533
$245.00
$350.00
SHOCKS WILL BE SETUP WITH COILS TO SUIT BAR AND WINCH AT APPROX 40MM LIFT. PLEASE MAKE CONTACT WITHIN 24 HOURS OF SALE TO REQUEST A DIFFERENT SETUP.
Carbon MT2.0 Monotube Shock Specifications
Monotube Design- Maximum fluid volume and control
H/D Brushed Steel Nickle Plated Body - Maximum strength durability and protection
52mm Outer Body - Increased fluid volume to prevent fade and improve control
20mm Hardened Chrome H/D Shaft - Tough Shaft for maximum durability
Piston Rings - Latest Piston Ring Technology - Full Teflon band seal
46mm Piston Valve - Twin deflective disc for maximum control of fluid for both rebound and compression cycles
Quality Bushes - Polyurethane or pure rubber dependant on application
Multi-Stage Velocity Sensitive Piston Valve - For the Ultimate in Comfort & Control
Seal - Active Shaft Seal - Provides a pressurised shaft sealing unit which has proven to have zero failure in all testing conditions.
Internal fluid - High quality Fuch shock absorber fluid able to withstand extreme temperatures
Internal Shock Specifications - Micro polished internal tube bore(mirror finish) to reduce drag and wear
Fully rebuildable - With a range of spare parts on the shelf for full Australian Support.
Nitrogen Gas Charged - to prevent fade and cavitation(foaming) of the fluid
Complete with concertina dust boots