Hidden Winch Cradles

Universal Winch Cradle. Use this mounting cradle as a base to build your own winch mount on the front or rear of your vehicle. They can be cut and modified to suit any application. They are drilled for the standard low mount winch bolt pattern and fairlead mounting point.    90cm Long x 13cm wide. Made from 4.5mm thick steel   

Tow Hitch Winch Cradle Use this 50mm tow hitch mount to make your winch a portable solution. The carry handles can be folded over the top of the winch for compact storage.  Suits low mount Winch 

Designed to suit the Nissan GU Patrol with genuine alloy bullbar. Our winch cradle solves the problem facing many Patrol owners. Until now you couldn�t put an electric winch into your Nissan Patrol fitted with a genuine alloy bullbar as there wasn�t a winch mounting plate available.  When designing this winch cradle compatibility was a key requirement. Roller or Hawse fairlead compatible. Whether you�re running synthetic rope or steel cable we have you covered. Once again we utilised the industry standard for the fairlead mounting so both roller and hawse fairleads will fit.   Built to last! Made from 8mm cold rolled mild steel they are strong, VERY STRONG!   Not only that, they come finished in a gloss black powder coat finish to ensure it stays looking good for years.   Don�t spend $1000�s of dollars to change your bullbar There is no need to change to a steel bullbar just to fit a winch. At a fraction of the cost to replace your bullbar you can achieve the same result using our winch cradle.   Reduced vehicle weight By removing the need to install a heavy steel bulbar you reduce the weight over the front axle. The effect of this is; Decrease fuel consumption. No need to upgrade front suspension. Reduce tyre wear. Increase vehicle carrying capacity.   Easy to fit yourself. Thanks to our comprehensive fitting instructions installation couldn�t be easier. Even people with little mechanical knowledge can competently tackle the install.  

Winch Cradle to replace the blank piece or PTO winch cradle on an Ex army Land Rover Perentie Bullbar Made in Australia from 5mm steel plate, laser cut and folded, then blasted and black powdercoated for corrosion protection. Allows fitment to the factory bolt holes on the chassis and will fit our CW-12K or any of the Scout Pro winch range.

Mount a Carbon TANK 20000lb to the rear of your NPS Isuzu 75 / 155 Cab Chassis Truck. Bolt on fitment. Fully braced, laser cut, welded and powdercoated winch plate. Made to order 14 day turnaround. Made in Australia.

Designed to suit the Nissan D22 Navara with genuine alloy bullbar. Our winch cradle solves the problem facing many Navara owners. Until now you couldn�t put an electric winch into your Nissan D22 Navara fitted with a genuine alloy bullbar as there wasn�t a winch mounting plate available. With our customers in mind we developed this cradle to solve the problem. Made to suit 99% of winches on the market. (including Chinese copies) When designing this winch cradle compatibility was a key requirement. That�s why we employed the Warn Winch mounting footprint. Warn has become the industry standard for electric winches and as a result most other manufacturers have copied their mounting specifications. Roller or Hawse fairlead compatible. Whether you�re running synthetic rope or steel cable we have you covered. Once again we utilised the industry standard for the fairlead mounting so both roller and hawse fairleads will fit. Built to last! Made from 6mm cold rolled mild steel they are strong, VERY STRONG! Not only that, they come finished in a gloss black powder coat finish to ensure it stays looking good for years. Don�t spend $1000�s of dollars to change your bullbar There is no need to change to a steel bullbar just to fit a winch. At a fraction of the cost to replace your bullbar you can achieve the same result using our winch cradle. Reduced vehicle weight By removing the need to install a heavy steel bulbar you reduce the weight over the front axle. The effect of this is; Decrease fuel consumption. No need to upgrade front suspension. Reduce tyre wear. Increase vehicle carrying capacity.

The Carbon Offroad Hidden Winch Mount retains your factory 4wd look and is perfect for those vehicle owners conscious about accessory weight or who don't need a bullbar on their vehicle.   Weight in 4wd's is a huge consideration when equipping them with 4wd accessories, excess weight on a 4wd can have many adverse effects on your wallet Fines from being over GVM  Added fuel costs from heavy accessories Additional wear and tear on vehicle components Diminished off-road ability as well.    Carbon Offroad's philosophy of offering light weight accessory options to 4wders has shown that big and heavy isn't always the way to go.    New to the Carbon range is the in bumper winch cradles that allow you to mount a winch to your 4wd but without having a heavy bullbar mounted to the vehicle.   The cradles generally mount behind the bumper retaining your O.E look of your vehicle.   We have a range to suit Toyota's, Ford, Mitsubishi, Volkswagen and Isuzu and more to come depending on industry demand. Average weight 10-15 kgs dependant on application RRP $895.00 Comes complete with instructions and vehicle specific  Pair this with a Carbon 12k Winch that only weights 23.45 kgs fitted(one of the lightest winches on the market made from high quality aluminium) and you have yourself a lightweight winch combo under 40kgs.